Intelligent rfid& fingerprint access control system three-roller
gate& Tripod Turnstile
Tripod Turnstile Description:
Tripod turnstile series are intelligent passage management
equipment researched, developed and produced by our company.The
equipment is integrated with delicate mechanical transmission,
microprocessor control, and various read/write techniques. It can
be used for intelligent control and management of the passage after
equipped with different read/write devices.
The outline of the product is formed after bending the stainless
steel plate. The shape is featured as pleasing appearance, good
looking, stainless and durable. The system is provided with a
standard electric interface and is easily integrated into the
equipment with read/write facilities such as magnetic card, bar
code card, ID card and IC card.
Tripod Turnstile Technical Specification:
| Description | Parameters |
| Lane Width | 550-570mm |
| IP | IP54 |
| Pass Speed | 30 persons/min |
| Power supply | AC220V/110V,50/60Hz |
| Drive Mode | Motor drive |
| Max Power Consumption | 200W |
| Opening time | 0.6S |
| Humidity | ≤90% coagulation free |
| Noise | ≤50dB |
| Service Life | 5,000,000 cycles |
| Outside packing | 67x110x42cm/130x110x42cm |
| Working Environment | -20°C~+60°C |
| Gross Weight | 65KGS/85KGS |
Tripod Turnstile Features:
1) The entire system runs smoothly, with a small noise and free of
mechanical impact.
The system adopts the exclusive technique of Jaw clutch. As a
result, the turnstile is more accurate and reliable for zero point
locking and unlocking.
2) DC Brushless Motor, Maintenance Free
3) It has failure self-detect and alarm indication function,
facilitating maintenance and application for the users.
4) It is provided with multiple operation modes for selection. It
can either read card in double way for flow limit, or reading card
in a way while barring in the other, or read card in a way while
free passage in the other. Moreover, the operation mode of
turnstile may be set up with the built-in small keyboard.
5) It has automatic function of opening or closing when power off.
6) The equipment is provided with a unified, standard electric
interface and is available to be integrated with various read/write
facilities to facilitate the system integration. It is able to
realize far end control and management with the help of
administrative computer.
7) It has a function of reading card with or without memory, and it
may be set up with the built-in small keyboard in accordance with
the requirements of the users.
8) Counting the passing people number automatically, and with LED
display
9) Direction indicator function, showing passing or prohibiting for
the people
10) Prohibiting opposite direction passing, one side reading the
card, the other side will lock when you passingforcedly; the
locking time can be set, and unlocked by the card.
11) Prohibiting illegal passing, the turnstile without the card,
the locking time can be set, and unlocked by the card.
12) Anti-hit against function, when the turnstile touches the
passing people, it will stop and after several seconds, it will
turn again.
13) Self resetting function, the system will cancel the people
passing right when reading the card but not passing, the time can
be set.
14) RS485 Communication function
Pre-sales service
* Inquiry and consulting support.
* Schematic design support.
* View our Factory.
After-sales service
* Guide how to install machine, how to use access control software
* Engineers available to service technical problem
