Tripod turnstiles face recognition & ID intergrate access control
system
Specification
- urnstile with built-in electronics
- Hub with automatic “Anti-panic” barrier arms
- Remote control panel
Automatic "Anti-panic" barrier arms enable immediate clear of the
passage for urgent evacuation of people in emergency case.
Emergency unblocking of the turnstile is performed by input of the
Fire Alarm signal to the turnstile or in emergency power failure.
At that the barrier arm automatically falls down ensuring free
passage.
When power supply is restored or Fire Alarm signal is removed, the
arm shall be manually set into operating position.
Automatic "Anti-panic" barrier arms unlike the mechanical ones
exclude the direct physical involvement of the operator and their
unsanctioned folding by unauthorized people.
TTR-08А tripod turnstile is made of stainless steel which provides
not only elegant design, but also resistance to corrosion when used
outdoors.
The turnstile housing has specially designed places for concealed
mounting of proximity card readers. The reader operating zones are
indicated on the lateral covers of the turnstile with special
pictograms.
The turnstile can be operated from the ACS controller, the RC panel
or the WRC (optional).
Power supply board is placed in the turnstile housing. After each
passage the reset mechanism sets barrier arms into initial
position. The built-in hydraulic damper provides smooth and silent
operation of the turnstile.
Special Fire Alarm input allows connecting the device that sends an
emergency unblocking signal (for example, from the fire alarm).
It is also possible to connect the passage zone control sensor and
the siren to the turnstile.
To ensure fast and convenient passage it is recommended to install
one turnstile per 500 people working the same shift, and on the
basis of maximum working load 30 persons/min.
Turnstiles can also be completed with railings, produced in the
same design
superiority:
1. We use 304 stainless steel from manufacturer ZhangPu,it is the
best 304 stainless steel in China,the price and quality higher than
other brands like LianZhong
304 and Taigang 304.We use Lianzhong's 304 stainless steel several
years ago,but it get rusty after 1-2 years,so we changed to use
ZhangPu brand.
2. We use original Mitsubishi brand drive board,it is stable with
overheat and overload dual protection,other company use cheap drive
board,it is easy to be burned,
need extra cost to buy a new drive board.
3. Our flap gate with mechainical auto-recerse and IR sensor,double
protection to avoid crushing onto user.
So our gate life time more than other cheaper one,more stable and
durable,you will no need worry about the after sale service for
your end users after you selling them.
